武汉理工大学材料科学与工程学院研究生导师：钱东升

导师信息来源：武汉理工大学材料科学与工程学院 2019-08-05　相关院校： 武汉理工大学

一、姓名：钱东升

二、基本情况：

1、出生年月：1982年7月

2、学位：博士

3、职称：副教授

4、工作院系：材料学院材料成型加工系

三、教育经历(从大学开始)：

1998.09-2002.07: 武汉理工大学，机械设计与制造，学士

2002.09-2006.07: 武汉理工大学，材料加工工程，硕士

2006.09-2009.06: 武汉理工大学，材料加工工程，博士

2016.03-2017.02: 英国诺丁汉大学，工程学部，访问学者

四、工作经历：

2009.07-2011.09: 武汉理工大学，材料学院材料成型加工系，讲师

2011.10-至今: 武汉理工大学，材料学院材料成型加工系，副教授

2009.12-2012.10: 天马轴承集团股份有限公司，博士后

五、研究领域(不多于3个)：

1、高性能轴承成形制造理论与技术

2、特种装备环类零件精密轧制成形理论与技术

六、科研项目(不多于5项)：

1、厚壁深槽环件复合轧制成形机理与技术基础研究(国家自然科学基金,主持)

2、高速机床主轴轴承精度损失溯源研究(国家自然科学基金，主持)

3、大型风电轴承环件精确轧制成形建模仿真与工艺控制研究(中国博士后科学基金，主持)

4、高性能汽车轴承精锻精轧控型控性关键技术研发与应用(湖北省重大科技创新计划，主持)

5、高性能油气管道阀门零件复合轧制先进技术与装备研发(江苏省重点研发计划，主持)

七、代表性论文及著作(不多于10项)：

[1] 钱东升. 异形截面环件冷轧力学原理和工艺理论研究. 武汉: 武汉理工大学出版社, 2012

[2] Guo Jun, Qian Dongsheng*.Grain refinement limit during hot radial ring rolling of as-cast GCr15steel. Journal of Materials Processing Technology, 2016, 231:151-161(JCR-Q1)

[3] Hua Lin, Deng Jiadong, Qian Dongsheng*, Lan Jan, Long Hui. Modeling and application of ring stiffness condition for radial-axial ring rolling. International Journal of Machine Tools & Manufacture, 2016,110: 69-79(JCR-Q1)

[4] Qian Dongsheng, Zhang Zhiqiang, Hua Lin*. An advanced manufacturing method for thick-wall and deep-groove ring-Combined ring rolling. Journal of Materials Processing Technology, 2013, 213(8):1258-1267(JCR-Q1)

[5] Qian Dongsheng, Hua Lin*, Pan Libo. Research on gripping conditions in profile ring rolling of raceway groove. Journal of Materials Processing Technology, 2009, 209(6):2794-2802 (JCR-Q1)

[6] Qian Dongsheng, Hua Lin*, Zuo Zhijiang. Investigation of distribution of plastic zone in the process of plastic penetration. Journal of Materials Processing Technology, 2007, 187:734-737(JCR-Q1)

八、联系方式：

1、Tel： 027-87168391

2、E-mail：qiands@whut.edu.cn

3、工作地址(实验室)：武汉理工大学马房山校区西院材料大楼407室

英文版简介

1. Name: Qian Dongsheng

2. Basic Information

1) Birth: 3 July 1982

2) Degree: Ph.D

3) Title: Associate Professor

4) School: School of Materials Science and Enginnering, Department of

Materials Processing

3. Education

1998.9-2002.7: B.S., in Material Processing Engineering, Wuhan University of

Technology

2002.9-2006.7: M.E., in Material Processing Engineering, Wuhan University of Technology

2006.9-2009.6: Ph.D. in Material Processing Engineering, Wuhan University of Technology

2016.3-2017.2: Academic Visitor, the University of Nottingham, Faculty of Engineering

4. Work Experience

2009.7-2011.9: Wuhan University of Technology, School of Materials Science and

Enginnering, Department of Materials Processing, Lecturer

2011.10-Present: Wuhan University of Technology, School of Materials Science and

Enginnering, Department of Materials Processing, Associate

Professor

2009.12-2012.10: Tianma Bearing Group Co, Ltd., Posterdoctor

5. Research Interests (no more than 3 items)

(1) Forming manufacturing theory and technique for high-performance bearings

(2) Precision rolling theory and technique for ring components of special equipments

6. Project Experience (no more than 5 items)

(1) Fundamental Research on Forming Mechanism and Technique for Combined Ring Rolling of Thick-wall and Deep-groove (National Natural Science Foundation of China, Project Leader)

(2) Research on Origin Tracing for Precision Loss of Main Shaft Bearing in High-speed Machine Tool (National Natural Science Foundation of China, Project Leader)

(3) Research on Precise Forming Simulation and Technology Control of Large Wind

Power Bearing Ring (China Postdoctoral Science Foundation, Project Leader)

(4) Research and Application on Key Technique of Shape and Property Control for Precision Forging and Rolling of High-performance Automotive Bearing (Important Science and Technology Innovation Program of Hubei province, Project Leader)

(5) Research and Development on Advanced Combined Rolling Technique and Equipment for High-performance Valve Components of Pipeline ( Primary Research & Development Plan of Jiangsu Province, Project Leader)

7. Publications (no more than 10 items)

[1] Qian Dongsheng. Research on Mechanical Principle and Technological Theory for Profile Ring Rolling( in Chinese ) Wuhan: Wuhan University of Technology Press, 2012

[2] Guo Jun, Qian Dongsheng*.Grain refinement limit during hot radial ring rolling of as-cast GCr15steel. Journal of Materials Processing Technology, 2016, 231:151-161(JCR-Q1)

[5] Qian Dongsheng, Hua Lin*, Pan Libo. Research on gripping conditions in profile ring rolling of raceway groove. Journal of Materials Processing Technology, 2009, 209(6):2794-2802 (JCR-Q1)

[6] Qian Dongsheng, Hua Lin*, Zuo Zhijiang. Investigation of distribution of plastic zone in the process of plastic penetration. Journal of Materials Processing Technology, 2007, 187:734-737(JCR-Q1)

8. Contact information

1) Tel: +86-(0)27-87168391

2) Email: qiands@whut.edu.cn

3) Address: 407 Room, Material Building, West Campus, Wuhan University of

Technology