武汉理工大学材料科学与工程学院研究生导师：毛华杰

• 2025考研英语全程班 早鸟3班
• 26考研全科上岸规划营「择校▪规划▪备考」
• 武汉理工大学2025考研专业课复习资料「真题▪笔记▪讲义▪题库」

一、姓名：毛华杰

二、基本情况：

1、出生年月： 1962-10-26

2、学 位：硕士

3、职 称：教授

4、工作院系：材料科学与工程学院，材料成形与加工系

三、教育经历(从大学开始)：

1980.9～1984.6 武汉工学院 压力加工专业本科学习

1987.9～1990.6 武汉工学院 金属塑性加工专业硕士研究生学习

四、工作经历：

1984.7～1987.8 武汉工学院机械工程二系锻压教研室任教

1990.6～1994.8 武汉工学院机械工程二系锻压教研室任教

1994.9～2000.4 武汉汽车工业大学材料学院材料成型及控制系任教

2000.5～ 武汉理工大学材料科学与工程学院材料成型及控制系任教

五、研究领域(不多于3个)：

精密成形与模具技术

汽车新材料与先进制造技术

材料成型及计算机应用

六、科研项目(不多于5项)：

斜齿圆柱齿轮旋转精冲成形机理及工艺方法研究(国家基金项目51375356)

10000kN精冲压力机(国家科技重大专项)

钢轨焊缝精密铣削数控装备关键技术研发(湖北省重大科技创新计划项目)

轴承套圈冷辗精密成形技术研究及其产业化(广东省重大科技专项)

商用车内外饰件材料工艺数据库与设计专家系统(企业委托)

七、代表性论文及著作(不多于10项)：

1、Study of static recrystallization behaviors of GCr15 steel under two-pass hot compression deformation

Huajie Mao, Rui Zhang, Lin Hua, and Fei Yin

Journal of Materials Engineering and Performance JMEPEG(2015)24:930–935

2、A blank optimization design method for three-roll cross rolling of complex-groove and small-hole ring

JiadongDeng,Huajie Mao(Corresponding author)

International Journal of Mechanical Sciences 93(2015)218–228

3、Optimization design for bean structures of rail weld CNC fine milling machine based on Ansys Workbench

Mao Huajie, Shu Min, Li Chao, Zhang Baojun

Applied Mechanics and Materials Vols.716-717(2015)pp817-824

4、Influence of processing parameters on molding process in microcellular injection molding

Wei Guo, Huajie Mao(Corresponding author), Bei Li, Xiangyu Guo

Procedia Engineering 81 ( 2014 ) 670 – 675

11th International Conference on Technology of Plasticity, ICTP 2014, 19-24 October 2014,

Nagoya Congress Center, Nagoya, Japan

5、Back propagation neural network based calculation model for predicting wear of fine-blanking die during its whole lifetime

Fei Yin , Huajie Mao(Corresponding author) , Lin Hua , Zhiqiang Gu

Computational Materials Science 59 (2012) 140–151

6、Warpage and Structural Analysis of Automotive Trim Based on FFD and CAE in Plastic Injection Molding

W.Guo H.J.Mao and Q.Xu

Advanced Material Research Vols. 314-316 (2011) pp 1282-1286(EI)

2011 International Conference on Advanced Design and Manufacturing Engining(ADME2011)

16-18 September,2011, Guangzhou, China

7、A hybrid of back propagation neural network and genetic algorithmfor optimization of injection molding process parameters

Materials and Design 32 (2011) 3457–3464

Fei Yin , Huajie Mao(Corresponding author) , Lin Hua

8、Back Propagation neural network modeling for warpage predictionand optimization of plastic products during injection molding

Materials and Design 32 (2011) 1844–1850

Fei Yin , Huajie Mao(Corresponding author), Lin Hua , Wei Guo Maosheng Shu

9、BP-GA-Based Multiobjective Optimization Method for Drawbead Design of B-pillar

Liu Jun, Mao Huajie, Yin fei,

2010 International Conference of Automotive Body Technology P395~404(2010-10)

10、Numerical Simulations and Optimization of B-pillar Forming Based on Different Binders

Liu Jun, Mao Huajie, Chen Rongchu

The 10th Asia-Pacific Conference on Engineering Plasticity and Its Applications P295—299(2010-11)

八、联系方式：

1、Tel：027-51111666

2、E-mail：maohj@whut.edu.cn

3、工作地址(实验室)：材料学院大楼404室