天津大学机械工程研究生导师介绍：张连洪

导师信息来源：中国半岛真人体育 2016-06-26　相关院校：天津大学

姓名（中文/汉语拼音）张连洪
职称教授、博导
职务博士生导师
专业机械工程
所在系、所机械工程系、机器人与汽车技术研究所
通讯地址天津大学机械工程学院,300072
电子信箱zhanglh@tju.edu.cn
办公室电话+86(0)22 27405294
传真+86(0)22 87402173
主要学历:
1978.10-1982.06 哈尔滨工业大学压力加工专业，本科生，获工学学士学位
1982.09-1985.06 哈尔滨工业大学压力加工专业，研究生，获工学硕士学位
1987.09-1991.03 清华大学压力加工专业，博士研究生, 获工学博士学位
主要学术经历:
1985.07-1987.09 天津大学机械工程系助教；
1991.04-1993.12 天津大学机械工程系讲师；
1994.01-1999.11 天津大学机械工程系、天津大学内燃机研究所副教授、硕士研究生导师
1999.12-2004.09 天津大学机械工程学院机械工程系教授、硕士研究生导师
2004.09-至今天津大学机械工程学院机械工程系教授、博士研究生导师
主要研究方向:
1. 制造装备与系统设计方法
2. 近净塑性成形技术
主要讲授课程:
1. 现代设计方法(研究生 32学时)
2. 模具设计与制造(本科生 32学时)
主要学术兼职:
天津市塑性工程(锻压)学会理事
中国塑性工程学会精密锻造学术委员会委员
主要学术成就、奖励及荣誉:
主持国家自然科学基金项目、863计划课题、省部及横向课题20余项，获天津市科学技术进步一、二等奖各1项，在Journal of Power Sources和Science in China(中国科学)等刊物发表论文60余篇。

主要科研项目及角色:
1. 国家自然科学基金资助项目“基于复杂加工对象精度需求的高性能复杂制造装备主动精度设计方法”（项目编号：50875182），2009.1-2011.12，项目负责人
2. 基于电磁偏转轨迹控制的抛射式快速成型工艺技术研究，国家自然科学基金项目(项目编号：50075062)，2001.1-2003.12，项目负责人
3. 质子交换膜燃料电池接触电阻特性多尺度建模与实验研究，高等学校博士学科点专项科研基金项目(项目编号：20050056006)，2006.1-2007.12, 项目负责人
4. 国家高技术研究发展计划资助项目（863计划）课题“系统性能驱动的复杂制造装备优化设计技术”（课题编号：2006AA04Z127），2006.12-2008.12，项目负责人
5. “高档数控机床与基础制造装备”科技重大专项课题“YKW51250数控插齿机”（课题编号：2010ZX04001-191），2010.1-2011.12，子课题负责人
6. “高档数控机床与基础制造装备”科技重大专项课题“YKW2075数控螺旋锥齿轮磨齿机”（课题编号：2011ZX04002-032），2011.1-2012.12，主要参加人
7. 机械产品创新和快速设计关键技术研究——液压机模块化快速设计及面向制造的CAD/CAPP/CAM系统, 天津市自然科学重大基金项目(项目编号：003804711)，2000.1-2002.1，第2完成人
8. 大型曲轴全纤维弯曲镦锻成形工艺CAE及工艺优化，天津市自然科学基金项目（项目编号：013605011），2002.9-2004.4，第1完成人
9. “科技部快速原型制造技术生产力促进中心(天津)”建设，国家重点科技项目(攻关)计划专题项目（项目编号：96-A22-02-043），1997.1-1999.10，第2完成人
10. 新一代内燃机超精密偶件加工技术研究，天津大学“十五”“211工程”学科建设项目，2003.11~2006.12，项目负责人
代表性论著:
JOURNAL PAPERS
(1) Cui Xintao, Wang Shuxin, Zhang Lianhong. Lightweight Automotive Doors Design Including Material and Manufacturing Process Selection, International Journal of Manufacturing Technology and Management, 14(1-2):118-129, 2008.
(2) Xu Yanwei, Zhang Lianhong, Liu Dequan, Wang Wei. Study on 3D Virtual Simulation Machining of Spiral Bevel Gear, China Mechanical Engineering, 19(22):2703-2707, 2008 (in Chinese).
(3) Xu Yanwei, Xiao Tieling. Wei Wei, Liu Dequan, Zhang Lianhong. Modeling and Virtual Machining of Chamfering Tooth Crest of Spiral Bevel Gear, Transactions of the Chinese Society of Agricultural Machinery, 39(9): 161-165, 2008 (in Chinese).
(4) Li Yancong, Zhang Lianhong, Zhang Chun, Wang Minghong. Analysis of Die Structural Design Considering Equipment Factors and Driven by the Formed Products' Precision, Mechanical Science and Technology for Aerospace Engineering, 27(5):571-574, 2008 (in Chinese).
(5) Wang Shuxin, Xie Chungang, Wang Yanhui, Zhang Lianhong, Jie Weiping, S. Jack Hu. Harvesting of PEM Fuel Cell Heat Energy for a Thermal Engine in an Underwater Glider, Journal of Power Sources, 169(2):338-346, 2007.
(6) Bai Yajiang, Zhang Lianhong, Ren ChenZu. Experimental Investigation on Honing of Small Holes, Key Engineering Materials, 329(1):303-308, 2007
(7) Cui Xintao, Wang Shuxin, Bi Fengrong, Zhang Lianhong. Multi-Criterion Optimal Design of Automotive Door Based on Metamodeling Technique and Genetic Algorithm, Transactions of Tianjin University, 13(3):169-174, 2007.
(8) Zhang Lianhong, Jie Weiping, Xie Chungang, Xu Jiafu, Song Haimin. Effects of Temperature, Pressure and Humidity on Electric Efficiency of PEMFC Stack, Journal of Tianjin University, 40(5):594-598, 2007 (in Chinese).
(9) Zhang Lianhong, Liu Ying, Song Haimin, Wang Shuxin, Zhou Yuanyuan, S. Jack Hu. Estimation of Contact Resistance in Proton Exchange Membrane Fuel Cells, Journal of Power Sources, 162(2):1165-1171, 2006.
(10) Cui Hongxiang, Gong Jiangong, Zhang Lianhong. Strength and Toughness Reinforcement of Biodegradable Material Poly (DL-lactic acid) by Intensified Shearing Plastic Deformation, China Plastics, 19(11):58-62, 2005. (in Chinese)
(11) Li Xiaojing, Li Shuangyi, Zhang Lianhong, Bi Dasen, Zhang Jian. Study of Technology of Self-piercing Riveting and Improved Approach, Journal of Tianjin Institute of Technology, 21(5):61-64, 2005 (in Chinese).
(12) Li Maochun, Zhang Lianhong, Wan Shumin, Wang Shuxin. Finite Element Simulation of Forming Process for Thin Metallic Flow Field Plate of Proton Exchange Membrane Fuel Cell (PEMFC), Chinese Journal of Power Sources, 29(8):502-504, 2005(in Chinese).
(13) Zhang Lianhong, Li Shuangyi. Mechanisms of Plastic Deformation for Powder Materials in Cold Working, Science in China, Ser. E, 46(4):432-638, 2003.
(14) Zhang Lianhong, Li Shuangyi, Zhang Baofeng, Xiong Xiaoming. Principle and Feasibility of Electric or Magnetic Field Deflection-Projection Based Rapid Prototyping Technique, Transactions of Tianjin University, 9(1):41-44, 2003.
(15) Zhang Yang , Zhang Lianhong, Li Shuangyi, Wang Hongzhi. Sheet Metal Forming Simulation and Its Application in Stamping Process of Automobile Panels, Transactions of Tianjin University, 8(4):269-272, 2002.
(16) Fan Haiqing, Li Shuangyi, Zhang Lianhong, Cui Hongxiang, Sun Liguo. Analysis and Comparison to RR-Method and TR-Method of Crankshaft Upset Forging, Metalforming Machinery, 29-31, 2002 (in Chinese).
(17) Xu Yanshen, Hou Liang, Zhang Lianhong, Li Sen. Theory of the Generalized Modular Design of Hydraulic Press and It’s Application, Machine Design, (7):1-3,41, 2001 (in Chinese).
(18) Zhang Lianhong, Cui Guoqi, Zhong Honghui, Wang Jian, Zhao Tao. Rapid Prototype Based Rapid Tooling, Machine Design, (9):36-38, 1999 (in Chinese).

CONFERENCE PAPERS
(1) Du Yunzhi, Zhang Lianhong, and Bai Yajiang. FEM Simulation of Drilling Processes with Twist Drill and Deep-hole Drill (Gundrill), The International Conference on Mechanical Engineering and Mechanics, Oct. 26-28, 2005, Nanjing, China.
(2) Zhang Lianhong, Wang Zutang. Investigation on the Textured Forming Mechanism and Method of Ceramic High Temperature Superconducting Tapes, The 1st International Conference on Processing Materials for Properties, Nov. 7-11, 1993, Hawaii.
(3) Ren Xueping, Zhang Lianhong. Theoretical Calculation of Flow Stress of Materials, The 4th Conference of Asia-Pacific Congress on Strength Evaluation, Oct. 8-10, 1991, Beijing, China.